Wingtip Black Antique
Ace Mark Size Guide
It is very important that you measure your feet using our tools and that you don't rely on sizing from other brands. We have adjusted our sizing to be in-line with US Brannock device sizing and our width is a "D". The "How to Choose the Correct Size" video shows the best methods for determining your Ace Marks size. Best methods are:
- Watch the first 5 videos in order
- Watch the "How to Print the Measuring Tool" video
- Watch the "How to Use the Measuring Tool" video
1) Find Your Size & Width
2) Fitting "D" Width Ace Marks
3) Fitting "E" Width Ace Marks
4) Guide for high arches (In-steps)
5) Sizing: Ace Marks vs. Other Brands
It is very important that you measure your feet using our tools and that you don't rely on sizing from other brands. We have adjusted our sizing to be in-line with US Brannock device sizing. We offer both a "D" and "E" width, based on the US Brannock sizing system. The "How to Choose the Correct Size" video shows the best methods for determining your Ace Marks size and width. Best methods are:
- Go into a store and have your feet measured using a Brannock device. (Video #1 @ :39)
- Print our Measuring Tool (Video #1 @ 1:40)
Step 1) Print Size (Length) Measuring Tool
Size Converion Charts: Length and Width
Measuring Tool for Length: 8.5x11 | A-4 Version | Legal 8.5x14 | 11x17
Step 2) Print Size (Width) Measuring Tool
Measuring Tool for Width (Based on Shoe Length):
8.5x11 sizes
Please select the width tool below for you size length. If you are a half size (size 5.5, 6.5, 7.5, etc.), just round down. A 10.5 would use the Size 10 tool.
A4 sizes
Please select the width tool below for you size length. If you are a half size (size 5.5, 6.5, 7.5, etc.), just round down. A 10.5 would use the Size 10 tool.
Legal 8.5x14 sizes
Please select the width tool below for you size length. If you are a half size (size 5.5, 6.5, 7.5, etc.), just round down. A 10.5 would use the Size 10 tool.
For instructions on how to use the foot measuring tool, please view the videos below.
How To Print The Sizing or Width Measuring Tool
How To Use The Sizing or Width Measuring Tool
How To Determine Your Size & Width Using The Sizing & Width Measuring Tool:
- Remove your shoes, but be sure to leave on a pair of socks similar to the type that you plan to wear with your shoes.
- Put a straight edge (ruler, clipboard, book, etc.) on the red line behind where it says "Right/Left Heel" (depending on which foot you are measuring--using the correct side is VERY IMPORTANT).
- While standing, put your heel firmly against the straight edge and put your foot down.
- Record the size indicated at the tip of your longest toe (the longest point of your foot). Marking this with a pen while standing on the tool is best, as it can be difficult to accurately read the measurement from a distance. If the size falls between two lengths, choose the longer length.
- Repeat entire measuring process for your other foot, but remember to flip the measuring tool so that you are using the correct side: Right or left heel. Very few people have feet that exactly match one another, and you should buy shoes based on your larger foot size.
- Record the width indicated on the widest part of your foot (make sure that the inside of your foot is properly aligned with the red line). Marking this with a pen while standing on the tool is best, as it can be difficult to accurately read the measurement from a distance. If your width falls between two widths, and you prefer a closer fit, you may want to stick with the narrower width unless you have a high instep. If you prefer a looser fit, go with the wider width.
- If you are a "2E" make sure that you buy half a size bigger than what you measure. So if you are a size 10EE, buy a size 10.5E.
- If you are a "3E" make sure that you buy a full size bigger than what you measure. So if you are a size 10EEE, buy a size 11E.
- If you have a high instep, you should stick with one of the lace shoes or monk straps. If you have a VERY high instep, go up half a size (if you are a "D" width with a very high instep, get an "E" width in your proper size).
- If you are a "C" width, make sure that you buy a half size smaller than what you measure. So if you are a size 10C, buy a size 9.5D. You should also stick with a lace shoe so that it can be better adjusted to your foot.
- If you are a "B" width, make sure that you buy a full size smaller than what you measure. So if you are a size 10B, buy a size 9D. You should also stick with a lace shoe so that it can be better adjusted to your foot.
- MAKE SURE TO WATCH ALL OF OUR SIZING VIDEOS TO GET EVEN MORE DETAILS AND EXPLANATIONS!!.
Derby wingtip Italian leather Wingtip in Black. The black antique wingtip is crafted from fine Italian leather and is hand-crafted, hand-dyed and hand-burnished. All Ace Marks shoes have a durable blake flex construction with leather soles and waxed dress shoe laces. Look no further for quality Italian leather dress shoes that can be worn to formal, semi-formal and casual occasions, making them ideal for the modern gentleman's wardrobe. The Wingtip Vincent Black Antique is the ultimate men's shoe with its understated elegance, classic design and bespoke craftsmanship. All customer purchases are eligible for Ace Marks' Buyback program and will be shipped free-of-charge to the US.
- Black lace-up derby dress shoe
- Wingtip Derby brogue with traditional styling
- Supple calfskin leather with upper leather lining
- Leather sole with non-marking rubber studs
- Blake Flex Construction with replaceable soles
- Resole-able Blake Stitch
- Classic elegant gentleman any-occasion dress shoes
- Hand-crafted in Italy
- Italian artisan quality dress shoes
As a premium supplier of fine Italian dress shoes for men, Ace Marks is committed to customer satisfaction. We are the only luxury brand that provides a Buyback guarantee on all sold footwear. When you make a selection from our online catalogue you are given the option to post back your old Ace Marks and receive a $50 credit towards the purchase of a new full-priced pair. Social engagement is important to us and as a partner of Career Gear, a leading national organization helping men in need, we donate used shoes to help men get back on their feet and re-enter the workforce. All orders in the USA are subject to Free shipping.
Wingtip Vincent Dress Shoe Specifications
- Full-grain Italian calf skin leather upper sourced from small batch artisans
- Supple calf-skin lining from heel to toe
- Leather outsole with sealed stitch channels
- Low pressure last
- Cushioned leather insole
- Hand dyed & burnished
- Standard D width
- Handcrafted in Italy
- Blake Flex Construction for extra flexibility (resoleable)
How can I be sure Ace Marks dress shoes will fit properly?
To ensure a good fit, see our Ace Marks size guide
Will the wingtip black antique dress shoe be able to stand everyday wear?
The wingtip black antique, like all Ace Marks shoes, is built tough enough to wear every day with minimal wear.
What distinguishes a Derby dress shoe from an Oxford?
The main difference is in the lace flaps. Oxfords have “closed lacing,” in which the lace flaps touch at the bottom.
Ace Marks Shoe Care
Caring for your dress shoes is cruial to making them last. Here are a few steps you can take in daily shoe care.
- Insert Shoe Trees in between wears
- Brush with horse hair brush after each use
- Brush with dauber on the edge where outsole meets upper after each use.
- Whenever possible, try to rotate your shoes throughout the week to give your shoe at least 24 hours to recover from the previous wear.
- If your shoes are wet, or if you notice some moisture inside the shoe, stuff your shoe with some newspaper to absorb the moisture. Allow to fully dry before wearing again.
Applying shoe polish every 9-10 wears is equally important. For a full step by step guide on polishing your Ace Marks shoes, please visit our shoe care guide.
Ace Marks Buy Back Program
All Ace Marks Italian leather shoes come with free shipping and are entitled to the Ace Marks buy back program. Ace Marks is the first and only luxury shoe brand that will buy back its shoes. Customers will be able to send back their old Ace Marks for a $50 credit towards a new pair. We partnered with Career Gear, a leading national organization helping men in need, to donate your old shoes and help men get back on their feet and re-enter the work force. All Ace Marks handcrafted leather shoe orders will come with a two way shipping label and if you need to exchange or return your Italian shoes it will be at no extra cost to you.
Derby wingtip Italian leather Wingtip in Black. The black antique wingtip is crafted from fine Italian leather and is hand-crafted, hand-dyed and hand-burnished. All Ace Marks shoes have a durable blake flex construction with leather soles and waxed dress shoe laces. Look no further for quality Italian leather dress shoes that can be worn to formal, semi-formal and casual occasions, making them ideal for the modern gentleman's wardrobe. The Wingtip Vincent Black Antique is the ultimate men's shoe with its understated elegance, classic design and bespoke craftsmanship. All customer purchases are eligible for Ace Marks' Buyback program and will be shipped free-of-charge to the US.
- Black lace-up derby dress shoe
- Wingtip Derby brogue with traditional styling
- Supple calfskin leather with upper leather lining
- Leather sole with non-marking rubber studs
- Blake Flex Construction with replaceable soles
- Resole-able Blake Stitch
- Classic elegant gentleman any-occasion dress shoes
- Hand-crafted in Italy
- Italian artisan quality dress shoes
As a premium supplier of fine Italian dress shoes for men, Ace Marks is committed to customer satisfaction. We are the only luxury brand that provides a Buyback guarantee on all sold footwear. When you make a selection from our online catalogue you are given the option to post back your old Ace Marks and receive a $50 credit towards the purchase of a new full-priced pair. Social engagement is important to us and as a partner of Career Gear, a leading national organization helping men in need, we donate used shoes to help men get back on their feet and re-enter the workforce. All orders in the USA are subject to Free shipping.
Wingtip Vincent Dress Shoe Specifications
- Full-grain Italian calf skin leather upper sourced from small batch artisans
- Supple calf-skin lining from heel to toe
- Leather outsole with sealed stitch channels
- Low pressure last
- Cushioned leather insole
- Hand dyed & burnished
- Standard D width
- Handcrafted in Italy
- Blake Flex Construction for extra flexibility (resoleable)
How can I be sure Ace Marks dress shoes will fit properly?
To ensure a good fit, see our Ace Marks size guide
Will the wingtip black antique dress shoe be able to stand everyday wear?
The wingtip black antique, like all Ace Marks shoes, is built tough enough to wear every day with minimal wear.
What distinguishes a Derby dress shoe from an Oxford?
The main difference is in the lace flaps. Oxfords have “closed lacing,” in which the lace flaps touch at the bottom.
Ace Marks Shoe Care
Caring for your dress shoes is cruial to making them last. Here are a few steps you can take in daily shoe care.
- Insert Shoe Trees in between wears
- Brush with horse hair brush after each use
- Brush with dauber on the edge where outsole meets upper after each use.
- Whenever possible, try to rotate your shoes throughout the week to give your shoe at least 24 hours to recover from the previous wear.
- If your shoes are wet, or if you notice some moisture inside the shoe, stuff your shoe with some newspaper to absorb the moisture. Allow to fully dry before wearing again.
Applying shoe polish every 9-10 wears is equally important. For a full step by step guide on polishing your Ace Marks shoes, please visit our shoe care guide.
Ace Marks Buy Back Program
All Ace Marks Italian leather shoes come with free shipping and are entitled to the Ace Marks buy back program. Ace Marks is the first and only luxury shoe brand that will buy back its shoes. Customers will be able to send back their old Ace Marks for a $50 credit towards a new pair. We partnered with Career Gear, a leading national organization helping men in need, to donate your old shoes and help men get back on their feet and re-enter the work force. All Ace Marks handcrafted leather shoe orders will come with a two way shipping label and if you need to exchange or return your Italian shoes it will be at no extra cost to you.
Matches Well With
Handcrafted To Perfection. Made In Italy.
Each pair of Ace Marks men's dress shoes are handcrafted by 4th generation Italian artisans. These craftsmen are the same men and women who make Italian dress shoes for the worlds top luxury brands.
Made By The Best, From The Best.
Each pair of Ace Marks Italian men's dress shoes are made with hand-selected full grain calf leather and are crafted, dyed, and burnished by hand. The lightweight Blake Flex construction and leather outsole allow for easy, effortless movement.
Direct to Consumer Prices
Ace Mark's direct to consumer business model means that we cut out the middleman and are offering you premium luxury Italian shoes at wholesale prices. That's a $600 luxury Italian men's dress shoes for under $300.
- Production Cost
- Business Overhead
- Mark Up
- Wholesale
- Retail Expense
- Retail Markup
| $595 | |
| Retail Markup | |
| Retail Expenses | |
| $295 | Wholesale |
| Business Overhead | Business Overhead |
| Production Cost | Production Cost |
 |
Retail |
Commited to Craftsmanship
Dedicated to unparalleled craftsmanship, our commitment shines through every detail. Discover a world where meticulous artistry meets passion, delivering excellence in every creation. Immerse yourself in quality that goes beyond, as we redefine the standard with our unwavering dedication to craftsmanship.